- SLSO 2
COMPOSITE PLAIN BEARINGS
Steel-sintered bronze-POM composite material – low maintenance
Material – Charakteristik
Steel with porously sintered tin bronze, coated with POM as a top layer.
The POM top layer creates a low-maintenance sliding material that is well suited for high loads and low sliding speeds.
The lubrication pockets form a lubricant reservoir in which larger quantities of lubricant can be stored, resulting in extended maintenance intervals.
OPERATING DATA
| Temperature range | -40 bis +130 °C | |
| with grease lubrication | ||
| max. PV value | 2,8 MPa m/s | |
| max. sliding speed | 2,5 m/s | |
| max. surface pressure | stat. 140 MPa – dyn. 70 MPa | |
| Thermal expansion | 11 x 10-6 °C-1 | |
| Coefficients of friction: | ||
| grease-lubricated | μ = 0,06 | to 0.14 |
FOR PLAIN BEARING DESIGN
Recommended fit for the plain bearing and mating components
| Shaft | h8 |
| Housing bore | H7 |
| Plain bearing | acc. to DIN ISO 3547-1 (formerly DIN 1494) |
At plain bearing temperatures above 80 °C, thermal expansion must be taken into account.
MATING MATERIAL
| Oberflächenrauheit | Ra = 0,4 μm |
| Mindesthärte | > 200 HB |
Product Description: Technical Properties and Available Materials
-
GLP Flat Wear Plate – Brass with lubricating pins
Add to Inquiry This product has multiple variants. The options may be chosen on the product page -
SLBF Flanged Plain Bearings – Brass with lubricating pins
Add to Inquiry This product has multiple variants. The options may be chosen on the product page -
SLB Cylindrical Plain Bearings – Brass with lubricating pins
Add to Inquiry This product has multiple variants. The options may be chosen on the product page -
SLSM-F Sintered Flanged Bearing – Sintered Bronze with Graphite
Add to Inquiry This product has multiple variants. The options may be chosen on the product page
Zu den Sandbeeten 11
35043 Marburg Deutschland
Tel.: +49 (0) 6421 94860 – 0
Fax: +49 (0) 6421 94860 – 20